description the hl01ryc series uses advanced circuit design and packaging technology to realize superior reliability and performance. a 125khz push-pull oscillator is used in the input stage. beat-frequency oscillator problems are reduced when using the hl01ryc series with high frequency isolation ampli?ers. reduced parts count and all surface mount construction add to the reliability of the hl01ryc series. the use of surface mount devices and magnetics eliminate hand soldering operations. this "hands-free" construction increases quality and reliability while keeping cost low. efficiency vs load 30% 0% 50% 75% 100% 0% 25% 50% 40% 20% 10% 60% load (ma) efficiency (%) t ypical performance curves speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. features n low cost n non-conductive case n internal input and output filtering n short circuit protected n built- in standoffs n industry standard pinout n rohs compliant absolute maximum ratings internal power dissipation.......................................................1.2w short circuit duration....................................................continuous lead temperature (soldering, 10 seconds max)................+300c * * note: refer to re?ow pro?le for smd models. ordering information device family hl indicates dc/dc converter model number where: xx = input voltage y = number or outputs (single "s", dual "d") zz = output voltage package option rohs compliant hl01r xxyzz y c hl01ryc.b01 page 1 of 3 technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 www.murata-ps.com hl01ryc 1 w att r egulated dc/dc c onverter $ for full details go to www.murata-ps.com/rohs
parameter conditions min typ max units input voltage range 4.75 5 5.25 vdc 11.4 12 12.6 vdc 14.25 15 15.75 vdc 22.8 24 25.2 vdc re?ected ripple current 30 100 map-p isolation rated voltage 500 vdc test voltage 60 hz, 10 seconds 500 vpk resistance 1 g capacitance 25 pf leakage current v iso = 240vac, 60hz 2 10 arms output rated power 1 w voltage setpoint accuracy 3 5 % temperature coef?cent 0.01 0.02 %/c ripple & noise bw = dc to 10mhz 30 100 mvp-p bw =10hz to 2mhz 1 10 mvrms line regulation high line to low line 0.1 1 % load regulation rated load to no load 0.5 1 % general switching frequency 125 khz package weight 10 g mttf per mil-hdbk-217, rev. f circuit stress method ground benign 675 khr moisture sensitivity level (msl) ipc/jedec j-std-20 2 temperature speci?cation -25 +70 c operation -40 +85 c storage -40 +110 c speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. common specifications nominal rated rated input current input output output voltage voltage current min load rated load efficiency model (vdc) (vdc) (ma) (ma) (ma) (%) hl01r05s05yc 5 5 200 50 400 58 hl01r05s12yc 5 12 83 50 400 52 hl01r05s15yc 5 15 67 50 400 52 hl01r12s05yc 12 5 200 40 160 58 hl01r12s12yc 12 12 83 40 160 52 hl01r12s15yc 12 15 67 40 160 52 hl01r15s05yc 15 5 200 30 130 58 hl01r15s12yc 15 12 83 30 130 52 hl01r15s15yc 15 15 67 30 130 52 hl01r24s05yc 24 5 200 20 80 58 hl01r24s12yc 24 12 83 20 80 52 hl01r24s15yc 24 15 67 20 80 52 hl01r05d05yc 5 5 100 50 425 45 hl01r05d12yc 5 12 41 50 400 53 hl01r05d15yc 5 15 33 50 400 53 hl01r12d05yc 12 5 100 40 185 45 hl01r12d12yc 12 12 41 40 160 53 hl01r12d15yc 12 15 33 40 160 53 hl01r15d05yc 15 5 100 30 145 45 hl01r15d12yc 15 12 41 30 130 53 hl01r15d15yc 15 15 33 30 130 53 hl01r24d05yc 24 5 100 20 90 45 hl01r24d12yc 24 12 41 20 80 53 electrical specifications speci?cations typical at t a = +25c, nominal input voltage, rated output current unless otherwise speci?ed. HL01R24D15YC 24 15 33 20 80 53 note: other input to output voltages may be available. please contact factory. hl01ryc.b01 page 2 of 3 technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 www.murata-ps.com hl01ryc 1 w att r egulated dc/dc c onverter
pin connections pin# singles duals 1 +vin +vin 2 nu -vout 3 nu common 10 -vout common 11 +vout +vout 12 -vin -vin 13 -vin -vin 14 +vout +vout 15 -vout common 22 nu common 23 nu -vout 24 +vin +vin nu = do not use. nc = no internal connection. duplicate pin functions are internally connected. all dimensions are in inches (millimeters). grid: 0.100 inches (2.54 millimeters) typically marked with: speci?c model ordered, date code, job code and logo. pin base metal is phosphor bronze. pin ?nish is matte tin (100-300 microinches) over a nickel barrel layer (5-40 microinches). mechanical package/pinout "y" these devices are intended for wave soldering or manual soldering. they are not intended to be subject to surface mount processes under any circumstances. the normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260c for a period of no more than 10 seconds. within this time and temperature range, the integrity of the devices plastic body will not be compromised and internal temperatures within the converter will not exceed 175c. care should be taken to control manual soldering limits identical to that of wave soldering. through-hole soldering information 3 ) $ % 6 ) % 7 4 / 0 6 ) % 7 % . $ 6 ) % 7 ?
?
( , 2 x x y z z 9 # dip package hl01ryc.b01 page 3 of 3 technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 www.murata-ps.com hl01ryc 1 w att r egulated dc/dc c onverter murata power solutions, inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. the descriptions contained her ein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. speci?cations are subject to chan ge without notice. ? 2008 murata power solutions, inc. usa: mans?eld (ma), tel: (508) 339-3000, email: sales@murata-ps.com canada: toronto, tel: (866) 740-1232, email: toronto@murata-ps.com uk: milton keynes, tel: +44 (0)1908 615232, email: mk@murata-ps.com france: montigny le bretonneux, tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com germany: mnchen, tel: +49 (0)89-544334-0, email: munich@murata-ps.com japan: tokyo, tel: 3-3779-1031, email: sales_tokyo@murata-ps.com osaka, tel: 6-6354-2025, email: sales_osaka@murata-ps.com china: shanghai, tel: +86 215 027 3678, email: shanghai@murata-ps.com guangzhou, tel: +86 208 221 8066, email: guangzhou@murata-ps.com singapore: parkway centre, tel: +65 6348 9096, email: singapore@murata-ps.com murata power solutions, inc. 11 cabot boulevard, mans?eld, ma 02048-1151 u.s.a. tel: (508) 339-3000 (800) 233-2765 fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com iso 9001 registered 10/10/08
|
